Pulse Oximetry SpO2 Simulator

Several widely used R-curves pre-enbeded, 24 conditions presetting and 8 conditions as default after start.

Brief IntroductionMS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter.Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.

FeaturesSeparated connection between simulator probe and host, operation and test are more convenient.262K color and 320*240 TFT, adjustable brightness level.Film key-press, makes the operation more comfortable.Power with chargeable lithium battery, can display the charge information of battery.Key volume, can open or close.

Main FunctionsOxygen saturation simulation;Pulse rate simulation;Patient state simulation preset;Can test the reaction time of device;Can simulate the SpO2 and pulse rate under different amplitude;Can test the performance of device under different interference source; Can select different R-curve.

Main ParametersSpO2 Measuring range: 35%~100%Resolution:1%Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%.Pulse rateMeasuring range:25bpm~250bpm   Resolution:5bpmError:1%±1bpmAmplitudeMeasuring range:0.000%~20.000% Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%.Patient state24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup.Voltage   DC 3.6V~4.2V Power Supply Voltage 3.7 rechargeable lithium battery × 1  Battery working life Charge and discharge no less than 500 times.

AccessariesA  MS100 user manual A  5.0V adaptor

Pulse Oximetry SpO2 Simulator